Skip to content

Furnace Repair in Beverly Hills, CA

Serving Beverly Hills and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 201-5255

The short answer

Liberty HVAC Services repairs gas furnaces in Beverly Hills homes in the 90211 and 90212 ZIP codes. We diagnose problems like no heat, short cycling, odd smells, and blower issues, then explain your options before any work starts. If replacement makes more sense than repair, we'll help you check current South Coast AQMD furnace rules and which utility rebates apply to your address.

Beverly Hills winters are mild, but cool nights from late fall into early spring still send most homes to the thermostat. Because furnaces here can sit unused for months, problems often show up the first evening you need heat: a burner that won't light, a blower that runs cold air, or a burning-dust smell that doesn't fade. Liberty HVAC Services repairs gas furnaces for homeowners in Beverly Hills, including the 90211 and 90212 ZIP codes. We're based in Los Angeles, about 3 miles southeast, so getting to you is straightforward. Our job is to find the actual cause, explain it in plain terms, and fix it so your system runs safely through the heating season.

Why Furnaces in Beverly Hills Fail at Startup

Los Angeles has a Mediterranean climate with dry summers and mild winters. That means many Beverly Hills furnaces run only a few weeks or months a year. Long idle periods are hard on equipment in ways people don't expect. Dust settles on burners and the flame sensor, pilot assemblies and igniters age without being exercised, and small issues go unnoticed until the first cold night.

Fall Santa Ana winds add to the problem. Hot, dry, dusty air gets pulled through return vents and loads up filters, so by the time you switch from cooling to heating, airflow may already be restricted. A clogged filter can make a furnace overheat and shut itself off on its high-limit safety switch, which looks like the system randomly quitting.

  • Furnace runs but blows cool or lukewarm air
  • Burners light, then shut off after a few seconds
  • Frequent short cycling on and off
  • Burning-dust smell that lasts more than the first hour of use
  • Rattling, squealing, or booming noises at startup
  • Thermostat calls for heat but nothing happens

How We Diagnose and Repair Your Furnace

We start by asking what you've noticed and when it happens, then test the system step by step instead of guessing. That usually means checking the thermostat signal, the control board and its error codes, the igniter or pilot, the flame sensor, gas pressure, the inducer motor, pressure switches, the blower, and the venting.

Once we find the cause, we tell you what failed, why, and what it takes to fix it. You decide before any repair begins. Common repairs include cleaning or replacing flame sensors, replacing hot surface igniters, swapping failed pressure switches or inducer motors, repairing blower motors and capacitors, and correcting airflow problems from blocked returns or dirty filters.

Safety Checks That Come With Every Visit

A gas furnace burns fuel inside your home, so we treat safety as part of the repair, not an add-on. We look at the heat exchanger area for signs of cracking or overheating, confirm the flue is drafting properly and isn't disconnected or blocked, and check for gas leaks at the connections we work on.

If we see something that makes the furnace unsafe to run, we'll explain it clearly and show you what we found. We'd rather tell you the truth about an old unit than patch it in a way that puts your household at risk. It's also a good time to make sure your carbon monoxide alarms are working.

When Repair Stops Making Sense

Sometimes the honest answer is that replacement is the better choice, usually when the heat exchanger is damaged or the furnace needs several major parts at once. If you're at that point in Beverly Hills, a few local rules matter.

South Coast AQMD Rule 1111 limits NOx emissions from natural-gas fan-type central furnaces sold and installed in the Los Angeles region, and the district has been amending it toward zero-emission requirements. Because the district sets and revises the compliance dates, anyone planning a furnace replacement should check the current rule before choosing equipment. We'll help you do that.

Many homeowners look at a heat pump instead of a new gas furnace. Rebates depend on which utility serves your address. LADWP residential electric customers can apply for rebates on qualifying heat pump systems based on the unit's SEER2/HSPF2 rating, filed within 12 months of purchase after installation. Many homes outside the City of Los Angeles are served by Southern California Edison instead, so we confirm the current offer for your address before quoting it. Note that the federal 25C tax credit only covered qualifying heat pumps placed in service before December 31, 2025, so it doesn't apply to new installations now.

Serving Beverly Hills and Nearby Areas

We handle furnace repair throughout Beverly Hills in ZIP codes 90211 and 90212. We also work with homeowners in nearby West Hollywood, Culver City, Santa Monica, Burbank, and Inglewood, so if you own property in more than one of these areas, the same team can help with both.

More services in Beverly Hills

Related

What to expect

How a visit goes

  1. Diagnose First

    We test the system and pinpoint the cause before suggesting parts or replacement, so you know what you're paying to fix and why.

  2. Clear Options

    When there's more than one way to solve a problem, we lay out each option, what it involves, and the tradeoffs, then let you decide.

  3. Current Rules and Rebates

    Local equipment rules and utility rebates change. We check the current requirements and the offers available for your address before planning an installation.

FAQ

Common questions

Why does my furnace smell like burning when I first turn it on?

After months of sitting idle, dust collects on the burners and heat exchanger and burns off when the furnace starts. A short-lived smell is normal. If it lasts beyond the first hour, or smells like melting plastic or electrical burning, shut the system off and call for service.

My furnace lights and then shuts off. What causes that?

A dirty or worn flame sensor is one of the most common causes, especially after a furnace has sat unused. Pressure switch problems, venting issues, or overheating from a clogged filter can cause the same symptom, which is why we test rather than guess.

How often should I change my furnace filter in Beverly Hills?

Check it at the start of the heating season and after Santa Ana wind events, since dry, dusty air can load filters quickly. Many households need a new filter every one to three months while the system is in use, depending on the filter type, pets, and dust.

Can I still install a new gas furnace in Beverly Hills?

South Coast AQMD Rule 1111 sets NOx limits for gas furnaces sold and installed in the region and has been amended toward zero-emission requirements. Compliance dates can change, so check the current rule before buying. We can walk you through what applies to your situation.

Are there rebates if I replace my furnace with a heat pump?

It depends on your utility. LADWP offers rebates on qualifying heat pumps for its residential electric customers, but many homes outside the City of Los Angeles are served by Southern California Edison. We confirm the current offer for your address before quoting it.

Can I still claim the federal tax credit for a heat pump?

No, not for new installations. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025, and isn't available after that date.

Tell Us What's Going On With Your System

Whether your AC stopped cooling, your furnace won't start, or you're thinking about switching to a heat pump, contact Liberty HVAC Services. We'll ask a few questions, look at the system, and explain your options before any work begins.

Call (669) 201-5255 Request Service